Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Valve Cover of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Checks and maintenance

To remove the valve cover of the Ford Focus, you need to open the bonnet to access the components inside the engine bay. Here, disconnect all the connectors attached to the injectors so that the wires can be moved. This will allow you to unscrew the screws that secure the cover and also those positioned beneath the windscreen washer reservoir. After removing the screws, you can detach the cover, allowing you to insert the new one, securing it properly and reconnecting all the connectors.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Valve Cover Gasket
Ford Focus (1998-2004 / MK 1) In this video, you will replace the gasket and internal brackets of the valve cover on a Ford Focus. Disconnect the throttle valves and cruise contro…
Replacement of Car Valves
Replacement of Car Valves
Ford Focus (1998-2004 / MK 1) This guide provides useful tips for replacing valves. The valve is a component subjected to intense stresses, and although they are often overlooked,…
How to replace the timing chain of a Ford Focus?
How to replace the timing chain of a Ford Focus?
Ford Focus (2018-2025 / MK 4) Good morning, today we are here to replace the timing belt of our Ford Focus. We will start by opening the hood of the engine. Then, we will need to …

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos