Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Kuga?

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Note that this video guide refers to the Ford Kuga produced from 2008 to 2012. The purpose of this tutorial is to show the guided procedure for resetting the service light after performing the service. Press the Start button and you will immediately see the Service Check warning on the central display.

At this point, press and hold the accelerator and brake pedals until you see the message Reset in Progress on the display. Only when you see Reset Complete should you turn off the instrument cluster, turn it back on, and ensure the reset has been completed.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) In this brief video tutorial, you will learn how to reset the maintenance light on a 2020 Ford Kuga with a 1.5 TDCi engine producing 120 bhp. To star…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) To reset the service light on a Ford Kuga, sit in the driver's seat and turn on the instrument cluster without starting the engine. Use the buttons o…
How do you reset the Service light on the Ford Kuga?
How do you reset the Service light on the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) To make the Service light on the Ford Kuga disappear, you need to turn on the instrument panel by inserting the ignition key into the corresponding s…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos