Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Windshield wipers

In this tutorial, you will see how to replace the rear wiper blade on a Ford Kuga, an extremely simple and quick operation. First, ensure the wiper is in the parked position, then move to the front and extend it fully. Next, rotate the blade so it is perpendicular to the arm, pull it to the right, and disengage it. Finally, position the replacement correctly, press it onto the arm, and lock the pin into place. Now, lower the wiper and test its operation.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper on a Ford Kuga?
How to Replace the Rear Wiper on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To replace the rear wiper on a Ford Kuga, lift the wiper arm to the working position. Then, rotate the blade approximately 90 degrees relative to the…
Removing the Rear Wiper Arm of the Ford Kuga
Removing the Rear Wiper Arm of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Want to remove the rear wiper arm? Follow the steps to detach the arm and install it on the rear tailgate of the Kuga. Lift the protective plastic on…
How to Replace the Timing Belt on a Ford Kuga?
How to Replace the Timing Belt on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos