Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper on a Ford Kuga?

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

To replace the rear wiper on a Ford Kuga, lift the wiper arm to the working position. Then, rotate the blade approximately 90 degrees relative to the arm to access the attachment system.

By pressing the locking tab, the blade can be slid down and removed from the mount. At this point, install the new wiper, ensuring the attachment is compatible with the original and push it until you feel it click into place.

Finally, gently return the arm to the rear window and operate the wiper along with the washer to ensure the new blade functions correctly.


Posted on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Ford Kuga?
How to Replace the Timing Belt on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…
How to Replace the Cabin Filter in a Ford Kuga
How to Replace the Cabin Filter in a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) This video shows how to replace the cabin filter in a second-generation Ford Kuga. First, ensure the vehicle is off, then work under the passenger gl…
How to Reset the Tyre Pressure Warning Light on a Ford Kuga?
How to Reset the Tyre Pressure Warning Light on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) This short video tutorial outlines all the steps to take to resolve the issue of the tyre pressure warning light coming on in a Ford Kuga. If the rea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos