Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Fuses on the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Fuse box

The Ford C-Max has three fuse boxes: the first fuse box is located under the glove compartment on the passenger side. Press the retaining clips to release the cover, lower the cover, pull it towards you, and you will find the fuse box. The second fuse box is located in the engine compartment, between the battery and the pillar. You will find a cover that you need to lift by releasing the tabs to access the fuse box. The last fuse box is located behind the carpet cover on the left side of the rear compartment. Remove it to access the fuse box in the boot. To replace a fuse, locate it, grasp it with small pliers, pull it out, and check if the bridge inside is broken; if so, the fuse needs replacing; otherwise, if the bridge is intact, the fuse is functional.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford C Max (2003-2010 / MK 1) On board the Ford C-Max, the fuses are divided into the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be …
Ford C Max (2010-2019 / MK 2) The fuses in the Ford C-Max are divided among three fuse boxes installed within the vehicle: the first box is located behind the glove compartment on…
Ford C Max (2010-2019 / MK 2) On board the Ford C-Max, the fuse boxes are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle:…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos