Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air filter

See other generations:
Video tutorial

If you want to carry out a DIY intervention to replace the air filter on your vehicle, follow the instructions below with the help of the video images. First, open the bonnet and locate the filter box on the right side behind the headlamp.

Using a socket spanner, unscrew the fastening nuts of the filter box cover and remove it. Under the cover, you will find the filter, which can be extracted and replaced with a new one, ensuring that the replacement specifications are compatible with your vehicle.

Place the new filter in the housing, close the filter cover, and refit the screws provided.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a Focus
Replacing the Air Filter on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let’s look at replacing the engine air filter on a Focus. To replace the air filter, lift the front bonnet where it is located. Raise the front bonne…
How to Remove the Air Filter on a Ford Focus
How to Remove the Air Filter on a Ford Focus
Ford Focus (2011-2018 / MK 3) Need to replace the air filter on a Ford Focus? Here's how to change it. Open the front bonnet, then unscrew the securing screws around the plastics …
Replacing the Timing Belt on a Ford Focus
Replacing the Timing Belt on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The engine air filter must be replaced periodically. Here’s how to replace it on a Ford Focus. Pull up the engine bay release lever located at the bo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos