Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for Ford Ranger

Model: Ford Ranger MK 3 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

See other generations:
Video tutorial

This brief video guide shows the location of the fuse boxes, along with all the relevant fuse diagrams detailing names, positions, and operating amperages of each individual fuse for a Ford Ranger, produced from 2006 to 2011. The first fuse box is located inside the vehicle's cabin, specifically to the right of the passenger footwell behind a small snap-on panel that needs to be removed.

The second fuse box is situated in the engine compartment, high up on our right as shown in the video.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Fuse box diagram and placement for the Ford Ranger.
Fuse box diagram and placement for the Ford Ranger.
Ford Ranger (2011-2023 / T6, P375, PX) The information provided in this guide will show us the layout and positioning of the fuse boxes in the Ford Ranger. First, we open the front door on…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …
Fuse Box Diagram and Location for the Ford Ranger
Fuse Box Diagram and Location for the Ford Ranger
Ford Ranger (1998-2011 / MK 3) Below are the steps to locate the fuse boxes and their diagram for the Ford Ranger, following the instructions provided. First, get inside the vehicl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos