Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Ford Fusion North America

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Headlight bulb

If you need to replace a burnt-out headlight bulb, follow these instructions. After opening the hood, locate the headlight assembly with the burnt bulb. On the back of the headlight, there is a rubber cover that you need to remove. Underneath, you will find the electrical connector, which you will disconnect. Then, rotate the bulb to remove it. Take the new bulb and position it inside the headlight, being careful not to touch the bulb with your fingers. Reconnect the power connector and finally, replace the rubber cover.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Ford Fusion North America?
How to Replace the Front Headlight Bulb on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the front headlight bulb on the Ford Fusion North America, open the hood to loosen the two screws that secure the headlight from the top. …
How to Replace the Outside Mirror on the Ford Fusion North America?
How to Replace the Outside Mirror on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the outside mirror on the Ford Fusion North America, you need to remove the cover of the window switch panel to access the underlying scre…
How to Replace the Rear Headlight on the Ford Fusion North America
How to Replace the Rear Headlight on the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) In this guide, you will see how to remove and replace the rear headlight on the Ford Fusion North America in simple and quick steps. First, open the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos