Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 7
- Years 2006-2014 If the AdBlue warning light on your Ford Transit does not go off even though you have regularly filled up with the additive, know that the problem may not be with the vehicle. Of course you can check through the OBDII reader, connected to the EOBD socket, as illustrated in the video, and from it cancel the error that is communicated in the control unit. However, now often the fault lies with the bad quality of the additive, which, since it is no longer easily available in Ukraine, where it was mostly produced, is found in other places where the quality is not as good. So when you buy AdBlue, spend a few euros more in order to avoid this problem.
Posted on 3 May 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |