Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Antifreeze coolant

To remove the coolant reservoir on the Ford Focus, open the bonnet to locate the reservoir on the left side of the engine bay. The reservoir can be removed from its housing by disconnecting the hose connected at the front left: once the hose is disconnected, unclip the fastening clips of the reservoir so that it can be extracted from its seat. Once the old reservoir is removed, insert the new one, connecting and securing it properly in its place.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant in the Ford Focus?
How to replace the coolant in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to replace the coolant in the Ford Focus, an extremely simple and quick operation. First of all, we wait for the engi…
Where is the coolant temperature sensor located in the Ford Focus?
Where is the coolant temperature sensor located in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this video we can see where the coolant temperature sensor is located in the Ford Focus and how to proceed in case we need to replace it. As shown…
Topping Up the Radiator Reservoir on Ford Focus
Ford Focus (2011-2018 / MK 3) Top up the radiator reservoir of the Ford Focus with the specified coolant. Here's how. Pull the plastic lever located at the bottom left of the dash…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos