Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Timing belt

Learn how to remove and replace the timing belt on a Ford Focus. Remove the coolant reservoir (located in the engine bay), lift the car on a column lift and remove the wheel, then unscrew the right wheel arch liner with a socket wrench. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. With a socket wrench, unscrew the tensioner pulley securing bolt and remove it from the engine bay. Fit the new tensioner and belt, tightening everything with the spanner. Finally, reassemble the wheel arch liner, fit the wheel, and reattach the coolant reservoir.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Ford Focus 1.0 Ecoboost
Guide to replacing the timing belt of the Ford Focus 1.0 Ecoboost
Ford Focus (2018-2025 / MK 4) Today we will see the main information that will allow us to dismantle and replace the timing belt of the Ford Focus 1.0 Ecoboost. First of all, we l…
How to replace the timing chain of a Ford Focus?
How to replace the timing chain of a Ford Focus?
Ford Focus (2018-2025 / MK 4) Good morning, today we are here to replace the timing belt of our Ford Focus. We will start by opening the hood of the engine. Then, we will need to …
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos