Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the SYNC multimedia system fuse located in the Ford Explorer?

Model: Ford Explorer U625, MK 6 - Years 2020-2026
Part: Car stereo

In this video, you can see where the SYNC multimedia system fuse is located in the Ford Focus, an element to check in case of sudden system malfunction. As shown, the fuse in question is positioned in the box inside the cabin, specifically in the lower area of the dashboard on the driver's side. It is labelled F15 and is 15A. If it is faulty, ensure you replace it with a spare of the same specifications and always work with the vehicle switched off, otherwise, you may damage the stereo.

Updated on 11 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Sync Multimedia System of the Ford Explorer
How to Reset the Sync Multimedia System of the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This guide explains how to reset the Sync multimedia system of the Ford Explorer, as well as other models, by following the instructions below. First…
How to Reset the System on a Ford Explorer
How to Reset the System on a Ford Explorer
Ford Explorer (2020-2026 / U625, MK 6) To reset the SYNC multimedia system on a Ford Explorer, turn on the ignition and use the central touchscreen display. If the system is frozen or unre…
Where is the Windscreen Washer Pump Fuse in the Ford Explorer?
Where is the Windscreen Washer Pump Fuse in the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) The Ford Explorer has two pumps for the windscreen washers, one at the front and one at the rear, each protected by its respective fuse. As shown in …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos