Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on a Ford Galaxy?

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Headlight bulb

In this tutorial, you will learn how to replace the front headlight bulbs on a Ford Galaxy, a task that is extremely simple and quick. First, open the bonnet. Then, using a Torx T30 spanner, undo the two fixing bolts located on the upper side of the headlight. Next, disconnect the large rear power connector and remove the headlight from the bodywork. At this point, remove the large rubber cap, extract the old bulb, and insert the replacement, taking care not to touch the glass directly with your bare hands to avoid any potential overheating.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Lights on a Ford Galaxy
Replacing Lights on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Need to replace damaged bulbs on a Ford Galaxy? Let’s see how to do it. Open the plastic cover at the front (by pulling the plastic located at the bo…
How to replace the front headlights in the Ford Galaxy?
How to replace the front headlights in the Ford Galaxy?
Ford Galaxy (2015-2023 / MK 3) In this tutorial we can see how to replace the front headlights in the Ford Galaxy, an extremely simple and quick operation. First of all, make sure …
How to replace the headlight bulb of the Ford Galaxy.
How to replace the headlight bulb of the Ford Galaxy.
Ford Galaxy (2015-2023 / MK 3) The instructions in this guide will allow us to disassemble and replace the headlight bulb of the Ford Galaxy. First, let's open the vehicle's hood a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos