Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Lights on a Ford Galaxy

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Headlight bulb

Need to replace damaged bulbs on a Ford Galaxy? Let’s see how to do it. Open the plastic cover at the front (by pulling the plastic located at the bottom of the wheel arch). Locate the headlight inspection cap and remove it (located at the rear of the headlight). Release the bulb holder from the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs (always the correct type and size) and insert the bulb holder into the headlight housing. Secure the bulbs in the headlight and close the plastic cover in the wheel arch. Turn on the lights.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Ford Galaxy?
Where are the fuses located in the Ford Galaxy?
Ford Galaxy (2015-2023 / MK 3) Each fuse of the Ford Galaxy is located inside one of the special fuse boxes that are installed on the vehicle: on this type of vehicle it is possibl…
How to Replace the Standard Radio in a Ford Galaxy
How to Replace the Standard Radio in a Ford Galaxy
Ford Galaxy (2015-2023 / MK 3) The instructions in this guide will help you remove and replace the standard radio in a Ford Galaxy. First, get inside the vehicle and start by remov…
Replacing the Battery on a Ford Galaxy
Replacing the Battery on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) This guide provides step-by-step instructions to remove and replace the battery on a Ford Galaxy in simple and quick steps. First, open the bonnet an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos