Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace key battery on Ford Figo.

Model: Ford Figo MK 1, B517 - Years 2010-2015
Part: Key

In this video we can see how to replace the remote control battery on Ford Figo. The material needed to replace the battery: A battery mod. CR 2032, a small size flat tip screwdriver. With the tip of the screwdriver, press into the slot in the remote control of the key to separate the two parts of the remote control. Subsequently with the hands to separate the parts, (with two fingers grasp the metal blade of the key and with the other hand pull the back part of the remote control where the key ring is attached), the battery is housed in this seat; just use your nails to separate the shell into two parts. Once the battery has been removed, replace it with the new one.

Posted on 27 February 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Ford Figo located?
Ford Figo (2010-2015 / MK 1, B517) In this new guide, we will discover how you can quickly and safely locate the fuse box of your first generation Ford Figo. First, turn off the car an…
How to replace the air filter of the Ford Figo.
How to replace the air filter of the Ford Figo.
Ford Figo (2010-2015 / MK 1, B517) In this new mini guide dedicated to your first generation Ford Figo (year 2010-2015), we will discover the various steps required to correctly replac…
How to change the battery on Ford Figo?
How to change the battery on Ford Figo?
Ford Figo (2010-2015 / MK 1, B517) If we want to replace the battery on this car in DIY mode, we can follow the very simple instructions given in this description and we can also take …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos