Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Enter Battery Diagnostic Mode on a Ford Figo B562

Model: Ford Figo MK 2, B562 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

This guide shows how to perform battery diagnostics on a Ford Figo B562 if you do not have a multimeter. This mode allows you to quickly check the battery status without accessing the engine compartment.

First, turn the key to the first stage of ignition. Then, while holding down the "TRIP" button located on the right lever of the steering wheel, turn the key one more notch until the instrument panel lights up. Continue holding the "TRIP" button until the word "TEST" appears on the multifunction display.

At this point, release the button and press it again until the "bat" option appears. The correct value for the battery to start the vehicle properly is between 140 and 150; with values below 100, the vehicle will likely not start.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on the Ford Figo
Where to Find the Fuse Box on the Ford Figo
Ford Figo (2015-2021 / MK 2, B562) If you own a Ford Figo and are wondering where the fuse box is located, follow these steps to find it. First, reach the front passenger seat and open…
Location and Diagram of the Fuse Boxes for the 2018 Ford Figo
Location and Diagram of the Fuse Boxes for the 2018 Ford Figo
Ford Figo (2015-2021 / MK 2, B562) This section provides the location of the fuse boxes for the 2018 Ford Figo, while the video illustrates the functions of the various fuses and relay…
Where is the Fuel Pump Located in the Ford Figo?
Where is the Fuel Pump Located in the Ford Figo?
Ford Figo (2015-2021 / MK 2, B562) In this video, you can see where the fuel pump is located in the Ford Figo and how to proceed if you need to replace it. As shown, the pump is positi…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos