Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Windscreen Washer Pump Fuse in the Ford Explorer?

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Fuse box

The Ford Explorer has two pumps for the windscreen washers, one at the front and one at the rear, each protected by its respective fuse. As shown in this video, the fuse for the rear pump, rated at 10A and labelled F10, is located in the fuse box inside the cabin, behind the small panel at the bottom left of the dashboard. The fuse for the front pump is located in the engine bay, in the box to the right of the battery. This one, rated at 30A, is labelled F4. If you need to replace them, use spares of the same amperage.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses in the Ford Explorer?
Where Are the Fuses in the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) The fuses in the Ford Explorer are located inside the designated fuse boxes within the vehicle: this model has two. The first is found inside the cab…
Where to Find the Fuse Boxes on the 2015 Ford Explorer
Where to Find the Fuse Boxes on the 2015 Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) Today we will look at the location of the fuse boxes on the 2015 Ford Explorer. The vehicle has two fuse boxes. The first is located inside the cabin…
Where is the Cigarette Lighter Fuse in a Ford Explorer?
Where is the Cigarette Lighter Fuse in a Ford Explorer?
Ford Explorer (2002-2005 / U152, MK 3) If the cigarette lighter in your Ford Explorer suddenly stops working, the first thing you can do is check the status of the respective fuses, the lo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos