Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Hydraulic Struts of the Bonnet on the Ford Explorer

Model: Ford Explorer MK 4, U251 - Years: 2006, 2007, 2008, 2009, 2010
Part: Body

See other generations:
Video tutorial

Follow this brief and simple guide for instructions on how to remove and replace the hydraulic struts of the bonnet on the Ford Explorer. First, open the bonnet of your car and hold it up while safely removing the hydraulic struts.

Then, use a lever to disengage the metal clip of the strut, located at both the top and bottom, as shown in the video. Now install the new hydraulic strut, ensuring it has the same dimensions; secure it properly at the base and at the top, following the video until the end!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on the Ford Explorer?
How to Replace the Starter Motor on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you will learn how to replace the starter motor on the Ford Explorer, a very simple and quick operation. First, ensure that the key…
How to Replace the Battery in a Ford Explorer
How to Replace the Battery in a Ford Explorer
Ford Explorer (2002-2005 / MK 3, U152) To replace the battery in a Ford Explorer, open the bonnet and access the engine bay, as the battery is located on the right side. Disconnect the app…
How to Replace the Battery on a Ford Explorer?
How to Replace the Battery on a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) To replace the battery on a Ford Explorer, open the bonnet to access the engine bay and locate the battery on the right side. Disconnect the cables a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos