Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Door Joints of the Ford Fusion North America?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Checks and maintenance

Cleaning the door joints of the Ford Fusion North America can be done with a rust prevention product that also has a lubricating function. This can be purchased at hardware stores or specialty automotive shops. A great choice in this regard is the WD-40 brand, but there are several other equally valid options. To start the cleaning process, spray the product on the areas to be cleaned and then distribute it evenly using a brush. After letting it sit for a few minutes, remove the excess product with a clean cloth.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from a Ford Fusion North America?
How to Remove the Rear Bumper from a Ford Fusion North America?
Ford Fusion North America (2006-2012 / MK 1) To remove the rear bumper from the Ford Fusion, open the trunk to detach the seal around the trunk opening. Once the seal is removed, detach the blac…
How to Replace the Outside Mirror on the Ford Fusion North America?
How to Replace the Outside Mirror on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the outside mirror on the Ford Fusion North America, you need to remove the cover of the window switch panel to access the underlying scre…
How to Replace the Front Headlight Bulb on the Ford Fusion North America?
How to Replace the Front Headlight Bulb on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the front headlight bulb on the Ford Fusion North America, open the hood to loosen the two screws that secure the headlight from the top. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos