Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a New Shell to the Ford Transit Remote

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Key

See other generations:
Video tutorial

Replacing the Ford Transit remote is very straightforward. This brief video tutorial will explain what to do. First, insert a hooked needle-nose pliers into the slot where you usually pull out the key and gently open the remote.

Next, take the key and remove the small screws from the metal part. Use the pliers to fit it into the new remote shell, and also insert the old, still functioning circuit board, and replace the battery.

Reassemble as shown in the video, and you will have completed the job.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Ford Transit?
How to Replace the Remote Battery on a Ford Transit?
Ford Transit (2014-2024 / MK 8) You can replace the remote battery on a Ford Transit by prying open the lower part of the device, allowing you to separate the two halves of the key …
How to replace the battery of the key fob remote control of a Ford Transit
How to replace the battery of the key fob remote control of a Ford Transit
Ford Transit (2014-2024 / MK 8) Replacing the battery of the key remote for a Ford Transit vehicle does not require difficult steps, you will only need a small screwdriver with a fl…
How to Replace the Key Fob Battery on a Ford Transit
How to Replace the Key Fob Battery on a Ford Transit
Ford Transit (2012-2024 / Custom) To replace the battery in the key fob of a Ford Transit, take the key fob and locate the unlock button on the back. Press the button and extract the …

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos