Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box layout on the Ford Ranger T6

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Fuse box

On this model from the American manufacturer, the fuses are gathered in two boxes, one located in the engine compartment near the battery and another in the cabin on the left side of the dashboard near the driver's door. The fuse for the cigarette lighter, or power socket, on this car model is marked with the number 20 and is located in the box found in the engine compartment. In this last box, you will also find the fuse for the ABS control unit and the front and rear electric window fuses.

Updated on 20 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the Fuse Box on the 2020 Ford Ranger?
Where is the Fuse Box on the 2020 Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) The 2020 Ford Ranger vehicles contain two fuse boxes. The first fuse box is located under the bonnet. Specifically, the fuse box is situated between …
Fuse Box Diagram and Location for the Ford Ranger
Fuse Box Diagram and Location for the Ford Ranger
Ford Ranger (1998-2011 / MK 3) Below are the steps to locate the fuse boxes and their diagram for the Ford Ranger, following the instructions provided. First, get inside the vehicl…
How to Replace the Fuse Box in the Ford Ranger Pickup?
How to Replace the Fuse Box in the Ford Ranger Pickup?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will see how to replace the fuse box in the Ford Ranger pickup, an operation to be carried out in case of water ingress or fail…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos