Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair, Install, Modify or Replace a Broken Ignition Lock Cylinder

Model: Ford Ranger MK 2 - Years 1993-1997
Part: Dashboard

If you have any issues with the ignition lock cylinder of a Ford Ranger, this tutorial will show you how to proceed. First, disconnect the negative battery terminal. To remove the old lock cylinder, a star screwdriver is sufficient. Position the key in the "RUN" (third click) position. Insert the screwdriver through the hole located under the lock and pry outward to extract the cylinder. Take the new cylinder and insert it into the empty socket until it clicks into place. Reconnect the negative battery terminal and test the ignition!

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of External Door Handle
Replacement of External Door Handle
Ford Ranger (1993-1997 / MK 2) This tutorial shows how to repair, install, modify, or replace an external door handle on a Ford Ranger. Start by removing the cover of the internal …
How to Install, Replace or Repair the Ignition Switch
How to Install, Replace or Repair the Ignition Switch
Ford Ranger (1998-2011 / MK 3) This video illustrates and explains how to carry out the replacement, installation or repair of the ignition switch on a Ford Ranger. To proceed safe…
How to disassemble the door lock actuator of the Ford Ranger
How to disassemble the door lock actuator of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) In this short guide, we will see the instructions that will allow us to disassemble and remove the door lock actuator of the front door of the Ford R…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos