Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Rear Door Panel and Replacing the Window Lift Motor

Model: Ford Focus MK 1 - Years 1998-2004
Part: Power window motor

Using a Torx screwdriver, unscrew the screws located behind the opening lever. Remove the window control panel and disconnect the connector at the back.
Dislodge the cover on the handle and unscrew the other two Torx screws, and the panel will be free.
Remove the speaker and take out the insulation to access the window lift mechanism. Unscrew the screws holding it in place and extract it.
If you only want to repair the damaged part, continue disassembling as shown in the video.
Once maintenance is complete, reassemble the mechanism in its place, reapply the insulation, and screw the panel back onto the door.

The video features a 2001 Ford Focus, but the procedure is similar for other vehicles.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair the Rear Window Regulator on a Ford Focus
How to Repair the Rear Window Regulator on a Ford Focus
Ford Focus (2004-2011 / Focus 2, MK 2) A common fault not only in Ford vehicles is the breakage of the plastic sliding pads in the window regulator mechanism: in this case, you can either …
Ford Focus rear window removal and replacement
Ford Focus rear window removal and replacement
Ford Focus (1998-2004 / MK 1) In this video we will show you how to remove the rear window motor on this car. After following the steps that guide you in removing the door panel, …
To remove the rear door panel covering of the Ford Focus, how do you proceed?
To remove the rear door panel covering of the Ford Focus, how do you proceed?
Ford Focus (2011-2018 / MK 3) Following carefully the tutorial on present, we can notice how the protagonist carries out a job from a to z about the assembly of the rear door of t…

Other guides you may be interested in

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos