Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Antenna support disassembly instructions

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Antenna
Operation: Antenna support disassembly instructions

The radio antenna support is fixed to the roof by means of a pin which can be accessed by removing the interior light ceiling; then start by unscrewing the antenna from its support and then proceed with the disassembly of the ceiling light: then unhook the transparent plate in which the bulbs are housed, disconnect the power sockets and then unscrew the fixing screws of the ceiling light support frame; at this point it is possible to access the fixing pin of the antenna support which also fixes the eyelet of the antenna cable itself; once this pin has been removed, the support can be extracted.


Posted on 28 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos