Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mustang
  6. : How to reset the tire pressure sensor in a Ford Mustang?

Ford Mustang - Video tutorial

Model: Ford Mustang MK 6, S550 - Years 2015-2023
Part: Tires
Operation: How to reset the tire pressure sensor in a Ford Mustang?

In this tutorial, we can see how to remove the tire pressure warning light in the Ford Mustang, which is a very simple operation to be carried out only after restoring the correct pressure of each tire following, for example, a puncture. First of all, we insert the key and turn on the instrument panel, then, using the directional buttons located on the left side of the steering wheel, we enter first into the general menu and then into "Driver Assist". Once we have done this, we select "Tyre pressure monitor" and, as indicated on the display, we hold down the "OK" button to reset it.


Posted on 23 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos