Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from a Ford Fiesta Mk6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Airbag

This guide shows how to remove the steering wheel airbag from a Ford Fiesta Mk6. You only need a small flathead screwdriver for this operation. After fully lowering the steering column, remove the upper trim of the steering wheel by acting on the retaining clips. Turn the steering wheel in both directions to expose two recesses at the back. By inserting the screwdriver into these recesses, you can release the airbag retaining pins. At this point, you can extract the airbag, taking care with the control cables. Disconnect the connectors and remove the part.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Airbag on a Ford Fiesta
How to Remove the Airbag on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Remove the covering plastics around the steering wheel (rear). Once the plastics are removed, unlock the securing clips of the airbag. Detach the air…
How to Remove the Airbag from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the airbag in your Ford Fiesta damaged? Let's see how to remove the airbag from above the steering wheel. This is a simple operation if done caref…
How to Remove the Steering Wheel of the Ford Fiesta
How to Remove the Steering Wheel of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide provides instructions on how to remove and replace the steering wheel and its airbag on the Ford Fiesta in simple and quick steps. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos