Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the electric window regulator from the Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Power window motor

Today, with the help of this video tutorial, we will illustrate the steps to remove the window switch and the motor that have stopped functioning. Start by removing the left front door panel; unscrew the screws from the handle, the lower part, and the central section, as shown in the video. Once the panel is removed, disconnect the connector and then remove the internal part between the panel and the metal section. After removing this, you can start working on the window motor. As shown in the video, remove the screws that secure the motor and the glass to fully extract it from its housing. Remove the motor and install the new one, then refit all the previously removed parts.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the exterior rearview mirror of the Ford Fiesta.
How to replace the exterior rearview mirror of the Ford Fiesta.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Ford Fiesta. First, let's open t…
How to Replace the Rear Window Regulator on a Ford Fiesta?
How to Replace the Rear Window Regulator on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the rear window regulator on a Ford Fiesta, loosen the screws located in the handle recess of the door and the one near the window switch …
How to Remove the Window Regulator Motor from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the window regulator motor from a Ford Fiesta? Don't worry, let's see together in this video how to proceed. Before starting the disass…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos