Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to disassemble the front window lifter in the Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Side window
Operation: How to disassemble the front window lifter in the Ford Fiesta?

In this tutorial, we can see how to disassemble the front window regulator in the Ford Fiesta, a very simple operation. First of all, we open the door in question, then we remove the corresponding panel by unscrewing all the fixing screws. Next, we locate the hole on the inner edge of the door, loosen the indicated bolt, and also remove the external handle. At this point, all that remains is to unscrew all the remaining bolts with a 10mm wrench, separate the additional inner panel, and remove the window regulator mechanism. To install the replacement, simply follow the reverse procedure.


Posted on 17 November 2023 by ScegliAuto



How to replace the window lifter mechanism of the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see below the step-by-step instructions for disassembling and replacing the window lifter mechanism of the Ford Fiesta, following these simple
How to replace the window lifter button on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we can start, we will have to go and open the door of our Ford Fiesta, thus obtaining the necessary space to carry out this procedure. Using a
How to replace the rear window lifter on Ford Fiesta?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In order to replace the rear window lifter of the Ford Fiesta you need to loosen the screws located in the seat of the internal door handle and the o

    Frequently Asked Questions

    • Fiesta 2017-2023 - What to do if the Ford Fiesta window is blocked? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos