Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Ford C-Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Service warning light

In this brief video tutorial, we will show you how to reset the maintenance light on a Ford C-Max, a model produced from 2003 to 2010. Start by pressing and holding the brake and accelerator pedals simultaneously, then turn on the ignition without starting the vehicle. At this point, you will see the reset message appear on the information display of the speedometer. Continue to hold both pedals down for about fifteen to twenty seconds until the information display shows the notification that the light has been reset.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Enter the Radio Code for a Ford C Max
How to Enter the Radio Code for a Ford C Max
Ford C Max (2003-2010 / MK 1) How to enter the radio code? Here’s how to enter the code after disconnecting the battery or replacing the stereo on a Ford C Max. This is a very sim…
How to Reset the Oil Light on Ford C-Max
How to Reset the Oil Light on Ford C-Max
Ford C Max (2010-2019 / MK 2) To reset the oil service light on a Ford C-Max, enter the vehicle and turn on the ignition (the maintenance light will be illuminated). Press the bra…
How to restore the service light on the Ford C Max
How to restore the service light on the Ford C Max
Ford C Max (2010-2019 / MK 2) In this short video tutorial, we are shown the procedure for resetting the maintenance light on the Ford C Max. The procedure is very simple and take…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos