Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit the Spare Wheel on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Wheel

In this video tutorial, see how to fit the spare wheel on a Ford Focus in case of a flat tyre. First, position the car on a flat surface; this ensures the jack is placed correctly. Get inside the vehicle and pull the handbrake, turn off the engine, and engage first gear. Open the boot and remove the floor panel, take out the polystyrene spacer, unscrew the fastening nut, and extract the spare wheel. Next, unscrew the nut and take out the toolbox, then disconnect the towing eye and the jack handle. Using the adapter supplied with the vehicle, loosen the wheel locking nut; the next step is to lift the car with the hydraulic jack by attaching the jack head to the lifting point indicated by an arrow. Use the handle to raise the vehicle until the wheel is off the ground. Completely unscrew the wheel nuts and then remove the wheel from its seat, placing it under the vehicle. Install the spare wheel and tighten the nuts. Remove the wheel and then lower the vehicle to the ground.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) Let’s see how to replace the wheel on a Ford Focus. Open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, whe…
Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to replace a wheel on the Ford Focus, an extremely simple and quick operation, to be carried out for example in case …
Ford Focus (2011-2018 / MK 3) This guide shows how to replace a flat tyre on the Ford Focus Hatchback Mk3. The first step is to position the vehicle on level ground, engage the ha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos