Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper

Model: Ford Edge MK 1, U387 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

Removing the rear bumper is straightforward as it does not require the removal of any other components such as the rear lights. Open the boot and start removing the bumper's retaining clips along the closure edge by pulling out the central pin. Next, unscrew the mounting bolts near the rear lights, those inside the wheel arches, and finally those along the lower edge of the bumper itself.

Once all bolts are removed, detach the bumper from under the rear lights and complete the removal.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Removing the Tailgate Panel on a Ford Edge
Removing the Tailgate Panel on a Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) In this video, we will see how to remove the tailgate panel of a second series Ford Edge by following these simple instructions. First, open the boot…
How to Replace the Ford Badge on the Ford Edge
How to Replace the Ford Badge on the Ford Edge
Ford Edge (2006-2014 / MK 1, U387) In this guide, you will find instructions to remove and replace the manufacturer badge on the Ford Edge. First, move to the front of the vehicle and …
How to Open the Boot on a Stuck Ford Edge?
How to Open the Boot on a Stuck Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) In the Ford Edge, the boot may become stuck, possibly due to a fault with the button or the lock actuator. In this case, you can perform an emergency…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos