|
Do it yourself
| |||
| ||||
How to Replace Cabin Air Filter
Model: Ford Kuga
C394, MK 1
- Years 2008-2012
Firstly, it should be noted that the cabin air filter should normally be replaced every 9,300 miles or annually. In this specific case, the filter is located next to the accelerator pedal as indicated by the arrow in the image taken from the outside. Approaching and entering the cabin, we see in detail the precise position of the filter indicated again by the arrow showing the filter cover. To proceed with the replacement of the filter, you will need to unscrew the screws indicated by the arrows and partially remove the accelerator pedal. At this point, you can open the cover and extract the filter, replacing it with a new one. Now all that’s left is to close the cover and reassemble the accelerator pedal. Car model: Ford Kuga
Required tools: screwdriver or spanner depending on the type of screw.
Updated on 19 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Kuga
(2012-2019 /
C520, MK 2)
How do you remove the air filter from the Ford Kuga? Let’s see how to take off the air filter. The cabin air filter is secured under the cover locate…
Ford Kuga
(2012-2019 /
C520, MK 2)
If it is time to replace the cabin air filter of your second-generation Ford Kuga (2017) but you do not know how to do it, do not worry because below…
Ford Kuga
(2012-2019 /
C520, MK 2)
As clearly shown in the video, to access the cabin air filter, or pollen filter, on a Ford Kuga, you need to work in the area under the glove compart…
Other guides you may be interested in
|
How to Lower the Rear Seats of a Citroen C4 Grand Picasso
In this video, we see how to lower the seats of the Citroen C4 Grand Picasso: the first thing to do is remove the parcel shelf and lower the load floor. Pull down the red straps that allow you to lower the two rear seats, which we cover with the expandable load floor. Now, go to the second row and take the black strap to push the first seat forward and fold it onto itself. At the back of this, there is a panel continuing from the load area. Do the same with the centre seat and then move to the other side to complete the operation with the last seat. The reverse operation is very simple to put all the seats back in place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 1.340
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |