Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : Change air filter Ford kuga 2.0 TdCi

Ford Kuga - Video tutorial

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Air filter
Operation: Change air filter Ford kuga 2.0 TdCi

How to remove the air filter from the Ford Kuga? Let's see how the air filter is removed. The cabin air filter is fixed under the cover located in the front engine compartment. We raise the hood, unscrew the tightening screws, remove the cap from the filter holder, then, extract the worn cabin filter. We insert a new cabin filter making it adhere well around the walls of the box container. We mount the filter box cap and screw in the clamping screws. We check the correct assembly of the previously assembled pieces. At the end of the maintenance we just have to close the front hood.


Posted on 16 January 2024 by ScegliAuto



When to change the timing belt on Ford Kuga 2.0 TDCI?
Ford Kuga (2008-2012 / MK 1, C394) In this guide we see some important instructions regarding the replacement of the timing belt of the Ford Kuga first series, with 2.0 TDCI 143 HP eng
How to replace the injectors on the Ford Kuga MK2 1.5 TDCi (PSA engine)
Ford Kuga (2012-2019 / C520, MK 2) In today's video tutorial we will see how to remove and replace the fuel injectors on the Ford Kuga 1.5 TDCi, but also on the 2.0 TDCi with PSA engin
How to replace the air filter on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video we can see how it is possible to replace the air filter of the Ford Kuga. First we need to know that the Ford Kuga's air filter is loca

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos