Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Ford Kuga MK1

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

How do you change the air filter on the Ford Kuga MK1? We will see this in the video: first, to open the bonnet of this version, pull up the emblem at the front and insert the key inside; this will allow you to open the bonnet. The YouTuber removes the cover of the engine block, but this is not essential, as the air filter is located low on the right side, and to remove the cover, you need to unscrew four screws located at the sides of the cover itself.

The filter comes out easily, and before refitting the new one (be careful to remember the fitting direction), it is advisable to clean the compartment and the cover of dirt and debris. Refit the cover, reattach the four screws, and the job is complete.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Ford Kuga?
How to Replace the Air Filter on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the air filter on a Ford Kuga, open the bonnet to locate the components inside the engine bay: on the right side, you will find the filter…
How to Replace the Air Filter on the Ford Kuga
How to Replace the Air Filter on the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this video, see how to replace the air filter on the Ford Kuga. First, note that the air filter is located in the engine bay. Prepare all necessar…
How to Remove the Cabin Filter on Ford Kuga
How to Remove the Cabin Filter on Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Learn how to remove the cabin filter on a Ford Kuga. Open the door (driver's side) and access the interior; remove the plastic covers (located at the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos