Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Air filter

In this video, see how to replace the air filter on the Ford Kuga. First, note that the air filter is located in the engine bay. Prepare all necessary materials for the job (the new air filter, a socket wrench to undo the bolts). Position the vehicle safely with the handbrake applied on a flat, solid surface. Lift the car's bonnet, take the socket wrench, and begin to undo the bolts of the box where the air filter is located; once all the screws are undone, lift the cover of the box; remove the air filter from its housing and replace it with the new filter. Refit the box cover and tighten the bolts.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Air Filter on a Ford Kuga 2.0 TdCi
How to Change the Air Filter on a Ford Kuga 2.0 TdCi
Ford Kuga (2012-2019 / C520, MK 2) How do you remove the air filter from the Ford Kuga? Let’s see how to take off the air filter. The cabin air filter is secured under the cover locate…
How to replace the cabin air filter of the 2017 Ford Kuga
How to replace the cabin air filter of the 2017 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) If it is time to replace the cabin air filter of your second-generation Ford Kuga (2017) but you do not know how to do it, do not worry because below…
Location of Cabin Air Filter on Ford Kuga
Location of Cabin Air Filter on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) As clearly shown in the video, to access the cabin air filter, or pollen filter, on a Ford Kuga, you need to work in the area under the glove compart…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos