Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Transit
  6. : How to replace the front bumper grille of the Ford Transit.

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Grille
Operation: How to replace the front bumper grille of the Ford Transit.

Today's video will show us how to disassemble and replace the front bumper grille of the Ford Transit, following these simple steps. First, we open the engine hood and start unscrewing the fastening screws found on the top part of the bumper. Then, we unscrew the screws located inside the front wheel arches, as shown in the video. At this point, we unscrew the fastening screws of the front bumper grille to remove it. There are two grilles on the bumper, the upper and lower ones. We replace the grilles and reassemble everything!


Posted on 9 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos