Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Service Reset on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

This short video tutorial shows the steps necessary to reset the service light on a third-generation Ford Focus, produced from 2011 to 2018. Start by turning on the vehicle's ignition without starting the engine. Then, press and hold down the brake and accelerator pedals simultaneously. You will see a notification of the reset in progress appear on the information display of the speedometer, so keep the pedals pressed until it is complete. Finally, restart the vehicle to check that the reset has been successful.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on a Ford Focus?
How to reset the service on a Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial, you will see how to reset the service on a Ford Focus, an extremely simple and quick operation to perform only after completing all…
How to Reset the Oil Service on a Ford Focus?
How to Reset the Oil Service on a Ford Focus?
Ford Focus (2018-2025 / MK 4) In this video, see how to reset the oil service on a Ford Focus. This is a straightforward operation to follow only after changing the oil and the co…
Reset the Engine Oil Change Warning (Service) on the Ford Focus
Reset the Engine Oil Change Warning (Service) on the Ford Focus
Ford Focus (2011-2018 / MK 3) We will briefly discover the instructions to reset the maintenance warning (service) on the Ford Focus. First, get in the car and press and hold the …

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos