Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to disassemble the passenger seat in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Seat
Operation: How to disassemble the passenger seat in the Ford Focus?

In this tutorial, we can see how to remove the passenger seat in the Ford Focus, a very simple and quick operation. First of all, we open the hood and disconnect the negative terminal of the battery, in order to avoid accidental activation of the airbags. Then, we move the seat back and, using a Torx T45 key, unscrew the front bolts of the brackets. We repeat the operation for the rear bolts, disconnect the connector of the airbag control module, and separate the seat from the floor. To install the replacement, simply follow the exact reverse procedure.


Posted on 22 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - How do you replace the rear seats of the Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos