Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Tank from a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018

Today, we will go through the instructions to remove and replace the fuel tank on a Ford Focus. First, raise the vehicle and begin by removing the panel located under the fuel tank; then unscrew the fastening bolts of the tank brackets, disconnecting all fuel lines and the electrical connector of the fuel pump, as shown in the video. At this point, if necessary, replace the old tank with a new one, securing it properly and making all connections, following the reverse procedure!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Tank on a Ford Focus
Removing the Fuel Tank on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide briefly outlines the steps to remove and replace the fuel tank on a Ford Focus. First, lift the vehicle and begin draining the fuel inside…
How to Change the Fuel Pump on a Ford Focus
How to Change the Fuel Pump on a Ford Focus
Ford Focus (2011-2018 / MK 3) In today's video, you will learn how to remove and replace the fuel pump on a Ford Focus by following the instructions below. First, lift the vehicle…
Focus Fuel Tank Disassembly
Focus Fuel Tank Disassembly
Ford Focus (1998-2004 / MK 1) Do you want to remove the fuel pump on a Ford Focus? Let's look at disassembling the pump and the fuel tank. Determine whether to remove the rear sea…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos