Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

This video tutorial shows the step-by-step procedure to reset the service light on your Ford Fiesta, sixth generation model produced from 2008 to 2017. Start by turning the key to the first position to activate the vehicle's injection without starting the engine, then press the brake and accelerator pedals simultaneously and hold them down for about fifteen to twenty seconds to reset the service light.

Finally, restart the vehicle to check that the operation was successful.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford Fiesta Mk7
How to Reset the Service Light on the Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you intend to manually reset the service light on your Ford Fiesta Mk7, simply follow this guide and put it into practice. First, get into the car…
Replacing the Number Plate Light on the Ford Fiesta
Replacing the Number Plate Light on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this brief and simple guide, follow the instructions to remove and replace the number plate light on the Ford Fiesta. First, move to the rear of t…
Resetting the service of a Ford Fiesta
Resetting the service of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this very short video tutorial today you will see how to reset the service light, the light related to the engine oil change, on a Ford Fiesta, si…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2002-2008 - Why does the Ford Fiesta door open light stay on? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos