Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter in Your Car

Model: Ford Focus MK 3 - Years 2011-2018
Part: Cabin air filter

Changing the cabin air filter in your car is very important as it protects you from external agents and improves the air circulation. It is crucial to replace it at regular intervals to ensure the health of passengers. It is advisable to replace it once a year or every 10,000 miles. Once you have purchased the new filter, locate the position of the one to be replaced and proceed with the replacement, which usually takes about fifteen minutes. The installation direction is usually indicated on the product itself, and the airflow must follow the installation direction.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Ford Focus (1998-2004 / MK 1) The cabin air filter is located in the engine compartment, just below the windscreen, in a roughly central position: remove the plastic protection gr…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Ford Focus (2011-2018 / MK 3) The cabin air filter is located on the passenger side, just below the glove compartment: to access the air duct and the cabin air filter housing, fir…
Replacing the Air Filter on a Focus
Replacing the Air Filter on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let’s look at replacing the engine air filter on a Focus. To replace the air filter, lift the front bonnet where it is located. Raise the front bonne…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos