Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Service warning light

To reset the Service light on the Ford Transit, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is powered, press the brake and accelerator pedals simultaneously for a few seconds. You will notice a message on the dashboard indicating that the Service light reset is in progress. When the reset is complete, a confirmation message will appear, allowing you to turn off the dashboard and release the two pedals.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2006-2014 / MK 7) Let’s see how to reset the service light on a Ford Transit without a display menu. This is the classic Ford system using the pedal combination; press…
Ford Transit (1994-2000 / MK 5) The selected video shows how to reset the maintenance light on a Ford Transit vehicle. Get in the vehicle, sit in the driver's seat, insert the key i…
Ford Transit (2000-2006 / MK 6) Here are step-by-step instructions on how to reset the service light for routine maintenance of the engine oil change on a Ford Transit. First, get i…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos