Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout for the Ford Bronco Sport?

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Fuse box

In this video, we can see where the fuses are located in the Ford Bronco Sport and what their respective diagrams are, useful in case we need to check the fuse of a malfunctioning device. As shown, the first box is located inside the cabin, precisely behind the panel located below the passenger's glove compartment. The second box is located inside the engine compartment, protected by the black plastic cover right next to the battery. Make sure to replace faulty fuses with equivalent spare parts to avoid causing damage.

Posted on 30 September 2023 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout for the Ford Bronco Sport?
What is the fuse layout for the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) In this video, we can see where the fuse boxes of the Ford Bronco Sport are located and what their respective diagrams are, to consult in case we nee…
What is the fuse diagram for the Ford Bronco Sport?
What is the fuse diagram for the Ford Bronco Sport?
Ford Bronco Sport (2021-2026 / Cx430) If the devices in our Ford Bronco Sport have suddenly stopped working, we can first check the status of the corresponding fuses, whose diagrams are i…
Where is the interior fuse box on the 2021 Ford Bronco Sport
Where is the interior fuse box on the 2021 Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) In this new guide of ours dedicated to the new 2021 Ford Bronco Sport, we're going to find out where the car's internal fuse box is located. Fortunat…

Other guides you may be interested in

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos