Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to connect your smartphone via Bluetooth to the Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part: Onboard computer

In this video, you will learn how to connect your smartphone via Bluetooth to your Ford Puma: there are several methods, for example, from the settings on the multimedia screen, click on Bluetooth, then connect device. Alternatively, from the screen, you can "enter" from the phone/add phone: Go to "audio" then click the left button "sources" here select "Bluetooth" and then "select device". Enter from here and see that it says "add Bluetooth device". Remember that you must always have Bluetooth turned on and visible on your device. Add a device from the screen, and see what your phone says, which quickly finds the car. The voice prompt asks you to confirm the PIN. Confirm, and the system pairs, and you will see the signal strength of your phone in the top right; then go to "phone" to view recent calls, contacts, the phone keypad, and the "do not disturb" mode. If you have songs on your phone, you can listen to them without any issues.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Puma 2022 remote control
How to replace the battery of the Ford Puma 2022 remote control
Ford Puma (2019-2026 / MK 1) In this new guide you will find the description of all the steps you need to follow to correctly replace the battery inside the remote control of you…
How to reset the "Service" light on a Ford Puma?
How to reset the "Service" light on a Ford Puma?
Ford Puma (2019-2026 / MK 1) To reset the "Service" light on a Ford Puma, use the buttons on the steering wheel to access the settings menu displayed on the dashboard screen. Loo…
What is the Fuse Diagram for the Ford Puma?
What is the Fuse Diagram for the Ford Puma?
Ford Puma (2019-2026 / MK 1) If some devices in your Ford Puma have suddenly stopped working, first check the status of the respective fuses, the diagrams for which are indicated…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos