Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Ford Puma?

Model: Ford Puma MK 1 - Years 2019-2026
Part:

The tire pressure sensor of the Ford Puma can be reset by inflating the tires until they reach the recommended pressure value: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been inflated, you can insert the key into the corresponding slot and turn on the dashboard: you will need to navigate to the menu by selecting "Vehicle Maintenance", then "Tire Pressure" and hold down the OK button on the right side of the steering wheel. After a few seconds, the warning light will disappear from the instrument panel, and then turn off.

Posted on 24 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Ford Puma?
How do you reset the tire pressure warning light on the Ford Puma?
Ford Puma (2019-2026 / MK 1) In order to reset the tire pressure warning light on the Ford Puma, you need to inflate the tires to the recommended pressure value: this value is in…
How do you reset the tire pressure light on the Ford Puma?
How do you reset the tire pressure light on the Ford Puma?
Ford Puma (2019-2026 / MK 1) To reset the tire pressure warning light on the Ford Puma, you need to inflate the tires until they reach the recommended pressure value: this value …
How to Reset the Tyre Pressure Light on a Ford Puma
How to Reset the Tyre Pressure Light on a Ford Puma
Ford Puma (2019-2026 / MK 1) In this tutorial, see how to reset the tyre pressure light on the Ford Puma, a very simple and quick operation, to be done only after restoring the c…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos