Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Car Steering Wheel

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Steering wheel

See other generations:
Video tutorial

Removing the steering wheel from your car requires time and a good dose of patience. The following guide shows you how to do it. First, disconnect the negative terminal of the battery to avoid triggering the airbag while working, then disconnect the connection wires and remove it. Remove the screw in the centre of the steering wheel using a Torx key. Next, pull the steering wheel towards you, passing the wiring through the gap at the top. The indicator stalk will need to be removed by disconnecting the two contacts at the top. You will also need to free the upper cable from any clips and slightly loosen the metal clip located behind the indicator stalk.

At this point, your work will be complete.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How do you remove the airbag and steering wheel of a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the…
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to remove the steering wheel on a Ford Fiesta with the airbag? In this video, see how to proceed. Before removing the steering wheel, disconnect …
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to remove the steering wheel airbag on a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the engine …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos