Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Thermostat

See other generations:
Video tutorial

Replacing the thermostat on a 2005 Ford C Max is a straightforward task that can be done in a few steps. First, open the bonnet to drain the system, as shown in the following video tutorial.

After this, disconnect the hoses connected to the thermostat assembly, unscrew the thermostat bolts, and clean the base thoroughly. Now, insert the new thermostat, reconnect the hoses, and fill the reservoir.

The next step is to start the car and wait for the fluid to circulate and reach the correct level. The replacement part can also be purchased on Amazon.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
Fuse Box of a Ford C Max
Fuse Box of a Ford C Max
Ford C Max (2003-2010 / MK 1) This useful video tutorial shows the location of the fuse boxes in a Ford C Max, both the first generation model produced from 2003 to 2010 and the s…
Replacing the Gas Struts on a Ford C-Max Boot
Replacing the Gas Struts on a Ford C-Max Boot
Ford C Max (2003-2010 / MK 1) Need to replace the gas struts on your car? How to remove and reinstall them? In this video, we will see how to replace the struts on a Ford C-Max bo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos