Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Tire pressure warning light

Follow these step-by-step instructions to reset the tyre pressure warning light on the Ford C-Max; before performing the reset, ensure all four tyres are at the correct operating pressure. Then, get inside the vehicle and turn on the instrument panel; next, go to the onboard computer settings and then to the tyre pressure option, using the arrow controls found on the steering wheel, as shown in the video. At this point, confirm and execute the TPMS warning light reset by holding down the OK button for a few seconds.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Ford C-Max?
How do you reset the tire pressure light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In order to reset the tire pressure warning light of the Ford C-Max, you need to inflate the car's tires to the recommended pressure value: this valu…
How do you reset the tire pressure warning light on a Ford C-Max?
How do you reset the tire pressure warning light on a Ford C-Max?
Ford C Max (2010-2019 / MK 2) The tire pressure warning light displayed on the instrument panel of the Ford C-Max can be reset by inflating the tires to the optimal pressure: this…
How to Reset the Tyre Pressure Warning Light on the Ford C Max
How to Reset the Tyre Pressure Warning Light on the Ford C Max
Ford C Max (2010-2019 / MK 2) If you notice that the low tyre pressure warning light illuminates while driving, check the actual tyre pressures and restore them to the manufacture…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos