Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to reset the tire pressure of the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tires
Operation: How to reset the tire pressure of the Ford Focus

To reset the tire pressure of the Ford Focus, first, we need to check the correct tire pressure as prescribed by the manufacturer. Turn on the instrument panel and start the car's engine. On the main screen, press the left arrow button to enter a menu. Use the down arrow button to navigate to the "settings" option and press the "ok" button. Press the "ok" button again on the "driver assist" option. Use the down arrow button to select "tyre monitor" and press the "ok" button. Then, hold down the "ok" button on the first message. Once the "ok" button is held down, the message "tyre pressure stored" will appear, indicating that the tire pressure has been reset.


Posted on 1 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2018-2025 - What to do when the tire sensors of the Ford Focus are not detected? Read Answer
    • Focus 2018-2025 - What to do if the tire pressure sensor does not work in the Ford Focus? Read Answer
    • Focus 2011-2018 - How to turn off the tire warning light on Ford Focus? Read Answer
    • Focus 2011-2018 - When does the tire warning light come on on a Ford focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos