Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Maintain the Ford Powershift Gearbox

Model: Ford Ford Various
Part: Transmission

In this video, you can see how to maintain the Ford Powershift gearbox: the 6DTC450 model has two oil drain plugs, which requires special attention; otherwise, you will not be able to perform a complete drain of the used oil. Additionally, remember to purchase two plugs and two seals, which are part of the kit for this model. The first is located at the front, and the second at the rear. The filter is next to the mechatronics, on the driver’s side. Then you can tighten the plugs, replace the sealing washers, and proceed with filling the oil.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Reliability of Ford's powershift II transmission
Reliability of Ford's powershift II transmission
Ford Ford Various Ford's automatic transmission, called Powershift, was made in two versions. The first, built between 2008 and 2015, had issues with the clutch pack. …
The issues of the 1st generation Ford Powershift automatic transmission.
The issues of the 1st generation Ford Powershift automatic transmission.
Ford Ford Various In this video we talk about the first generation Ford Powershift automatic transmission: the most serious problem is caused by the clutch pack which …
How do you reset the Ford Powershift automatic transmission?
How do you reset the Ford Powershift automatic transmission?
Ford Ford Various The Powershift automatic transmission, installed on Ford cars, may suddenly not respond to commands, preventing the use of the vehicle. There is no n…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos